You copied the Doc URL to your clipboard.

B.2. Prospector-specific commands for boot monitor

The Prospector platforms provide a set of system-specific boot monitor commands. These are listed in Table B.2. Commands are not case-sensitive.

Prospector system-specific commands
CommandAction
D addressDisplay memory at address (use hex format)
G addressGo to address (use hex format)
H or ?Display help
P address dataPoke data at address (use hex format for both values)
R numberRun image number from flash
VView images in flash (boot and application flash)
X commandExit board-specific command mode
Was this page helpful? Yes No