In this section of the guide, we will configure the Raspberry Pi to run with Streamline.
Follow these steps:
- Navigate to the latest version of Raspbian from Raspberry Pi. Follow the instructions to create an SD card, using whatever path is easiest.
- Use the
ddcommand on Linux, or the Raspberry Pi Imager on Linux, macOS or Ubuntu, to copy the
.imgfile to the SD card. The Raspberry Pi Imager is easy to use. We recommend that you use an SD card that is 16GB or larger.
- Boot the system for the first time. The easiest way to boot the system is to connect an HDMI monitor and keyboard. The default username is
piand the default password is
- Connect the wireless or wired network for Internet connectivity. A wired connection is available by plugging an Ethernet cable into your router. Usually no additional steps are needed.