neric Timer functional description
The Cortex-A73 processor provides a set of timer registers within each core of the cluster. The timers are:
- An EL1 Non-secure physical timer.
- An EL1 Secure physical timer.
- An EL2 physical timer.
- A virtual timer.
The Cortex-A73 processor does not include the system counter. This resides in the SoC. The system counter value is distributed to the Cortex-A73 processor with a synchronous binary encoded 64-bit bus, CNTVALUEB[63:0].
Because CNTVALUEB[63:0] is generated from a system counter that typically operates at a slower frequency than CLK, the CNTCLKEN input is provided as a clock enable for the CNTVALUEB[63:0] bus. CNTCLKEN is registered inside the Cortex-A73 processor before being used as a clock enable for the CNTVALUEB[63:0] registers. This allows a multicycle path to be applied to the CNTVALUEB[63:0] bus. The following figure shows the interface.
Figure 9-1 Architectural counter interface
The value on the CNTVALUEB[63:0] bus is required to be stable whenever the internally registered version of the CNTCLKEN clock enable is asserted. CNTCLKEN must be synchronous and balanced with CLK and must toggle at integer ratios of CLK.
See Clocks for more information about CNTCLKEN.
Each timer provides an active-LOW interrupt output to the SoC.
The following table shows the signals that are the external interrupt output pins.