You copied the Doc URL to your clipboard.

__enable_irq intrinsic

This intrinsic enables IRQ interrupts.

To use this intrinsic, your source file must contain #include <arm_compat.h>. This is only available for targets in AArch32 state.

Note

Typically, this intrinsic enables IRQ interrupts by clearing the I-bit in the CPSR. However, for Cortex M-profile processors, it clears the exception mask register (PRIMASK).

Syntax

void __enable_irq(void)

Restrictions

The __enable_irq intrinsic can only be executed in privileged modes, that is, in non-user modes. In User mode, this intrinsic does not change the interrupt flags in the CPSR.

Was this page helpful? Yes No