Zero extend Byte.
is an optional condition code.
is the destination register.
is the register holding the value to extend.
is one of:
isrotated right 8 bits.
isrotated right 16 bits.
isrotated right 24 bits.
is omitted, norotation is performed.
UXTB extends an 8-bit value to a 32-bit value. It does this by:
Rotating the value from
right by 0, 8, 16, or 24 bits.
Extracting bits[7:0] from the value obtained.
Zero extending to 32 bits.
You cannot use PC for any operand.
You can use SP in A32 instructions but this is deprecated. You cannot use SP in T32 instructions.
This instruction does not change the flags.
The following form of this instruction is available in T32 code, and is a 16-bit instruction:
mustboth be Lo registers.
The 32-bit instruction is available in A32 and T32.
The 16-bit instruction is available in T32.