You copied the Doc URL to your clipboard.

16.10 ADDS (shifted register)

Add (shifted register), setting flags.

This instruction is used by the alias CMN (shifted register).

Syntax

ADDS Wd, Wn, Wm{, shift #amount} ; 32-bit general registers

ADDS Xd, Xn, Xm{, shift #amount} ; 64-bit general registers

Where:

Wd

Is the 32-bit name of the general-purpose destination register.

Wn

Is the 32-bit name of the first general-purpose source register.

Wm

Is the 32-bit name of the second general-purpose source register.

amount

Depends on the instruction variant:

32-bit general registers

Is the shift amount, in the range 0 to 31, defaulting to 0.

64-bit general registers

Is the shift amount, in the range 0 to 63, defaulting to 0.

Xd

Is the 64-bit name of the general-purpose destination register.

Xn

Is the 64-bit name of the first general-purpose source register.

Xm

Is the 64-bit name of the second general-purpose source register.

shift

Is the optional shift type to be applied to the second source operand, defaulting to LSL, and can be one of LSL, LSR, or ASR.

Operation

Add (shifted register), setting flags, adds a register value and an optionally-shifted register value, and writes the result to the destination register. It updates the condition flags based on the result.

Rd = Rn + shift(Rm, amount), where R is either W or X.

Was this page helpful? Yes No