You copied the Doc URL to your clipboard.

16.59 DC

Data Cache operation.

This instruction is an alias of SYS.

Syntax

DC dc_op, Xt

Equivalent to SYS #op1, C7, Cm, #op2, Xt.

Where:

dc_op

Is a DC operation name, as listed for the DC system operation group, and can be one of the values shown in Usage.

op1

Is a 3-bit unsigned immediate, in the range 0 to 7.

Cm

Is a name Cm, with m in the range 0 to 15.

op2

Is a 3-bit unsigned immediate, in the range 0 to 7.

Xt

Is the 64-bit name of the general-purpose source register.

Usage

Data Cache operation. For more information, see A64 system instructions for cache maintenance in the ARMv8-A Architecture Reference Manual.

The following table shows the valid specifier combinations:

Table 16-7 SYS parameter values corresponding to DC operations

dc_opop1Cmop2
CISW0142
CIVAC3141
CSW0102
CVAC3101
CVAU3111
ISW062
IVAC061
ZVA341
Was this page helpful? Yes No