You copied the Doc URL to your clipboard.

16.131 SUB (shifted register)

Subtract (shifted register).

This instruction is used by the alias NEG (shifted register).

Syntax

SUB Wd, Wn, Wm{, shift #amount} ; 32-bit general registers

SUB Xd, Xn, Xm{, shift #amount} ; 64-bit general registers

Where:

Wd

Is the 32-bit name of the general-purpose destination register.

Wn

Is the 32-bit name of the first general-purpose source register.

Wm

Is the 32-bit name of the second general-purpose source register.

amount

Depends on the instruction variant:

32-bit general registers

Is the shift amount, in the range 0 to 31, defaulting to 0.

64-bit general registers

Is the shift amount, in the range 0 to 63, defaulting to 0.

Xd

Is the 64-bit name of the general-purpose destination register.

Xn

Is the 64-bit name of the first general-purpose source register.

Xm

Is the 64-bit name of the second general-purpose source register.

shift

Is the optional shift type to be applied to the second source operand, defaulting to LSL, and can be one of LSL, LSR, or ASR.

Operation

Subtract (shifted register) subtracts an optionally-shifted register value from a register value, and writes the result to the destination register.

Rd = Rn - shift(Rm, amount), where R is either W or X.

Was this page helpful? Yes No