You copied the Doc URL to your clipboard.

20.169 SQDMLAL, SQDMLAL2 (vector, by element)

Signed saturating doubling multiply-add long (by element).

Syntax

SQDMLAL{2} Vd.Ta, Vn.Tb, Vm.Ts[index]

Where:

2

Is the second and upper half specifier. If present it causes the operation to be performed on the upper 64 bits of the registers holding the narrower elements. See Q in the Usage table.

Vd

Is the name of the SIMD and FP destination register.

Ta

Is an arrangement specifier, and can be either 4S or 2D.

Vn

Is the name of the first SIMD and FP source register.

Tb

Is an arrangement specifier, and can be one of the values shown in Usage.

Ts

Is an element size specifier, and can be either H or S.

Vm

Is the name of the second SIMD and FP source register:

  • If Ts is H, then Vm must be in the range V0 to V15.

    .
  • If Ts is S, then Vm must be in the range V0 to V31.

    .
index

Is the element index, in the range shown in Usage.

Usage

The following table shows the valid specifier combinations:

Table 20-57 SQDMLAL{2} (Vector) specifier combinations

QTaTbTsindex
-4S4HH0 to 7
24S8HH0 to 7
-2D2SS0 to 3
22D4SS0 to 3
Was this page helpful? Yes No