You copied the Doc URL to your clipboard.

ARM Compiler armasm User Guide : LDRSW (register)

LDRSW (register)

Load Register Signed Word (register).

Syntax

LDRSW Xt, [Xn|SP, Rm{, extend {amount}}]

Where:

Xt

Is the 64-bit name of the general-purpose register to be transferred.

Xn|SP

Is the 64-bit name of the general-purpose base register or stack pointer.

R

Is the index width specifier, and can be either W or X.

m

Is the number [0-30] of the general-purpose index register or the name ZR (31).

extend

Is the index extend/shift specifier, defaulting to LSL, and can be one of the values shown in Usage.

amount

Is the index shift amount, optional and defaulting to #0 when extend is not LSL, and can be either #0 or #2.

Usage

Load Register Signed Word (register) calculates an address from a base register value and an offset register value, loads a word from memory, sign-extends it to form a 64-bit value, and writes it to a register. The offset register value can be shifted left by 0 or 2 bits. For information about memory accesses, see Load/Store addressing modes in the ARMv8-A Architecture Reference Manual.

The following table shows the valid specifier combinations:

Table 17-8 LDRSW specifier combinations

R extend
W SXTW
W UXTW
X LSL
X SXTX
Was this page helpful? Yes No