Unsigned parallel halfword-wise subtraction.
is an optional condition code.
is the destination general-purpose register.
are the general-purpose registers holding the operands.
This instruction subtracts each halfword of the second operand from the corresponding halfword of the first operand and writes the results into the corresponding halfwords of the destination. The results are modulo 216. It sets the APSR GE flags.
You cannot use PC for any operand.
You can use SP in A32 instructions but this is deprecated. You cannot use SP in T32 instructions.
This instruction does not affect the N, Z, C, V, or Q flags.
It sets the GE flags in the APSR as follows:
for bits[15:0] of the result.
for bits[31:16] of the result.
It sets a pair of GE flags to 1 to indicate that the corresponding result is greater than
or equal to zero, meaning a borrow did not occur. This is equivalent to a
SUBS instruction setting the C condition flag to 1.
You can use these flags to control a following
NoteGE[1:0] are set or cleared together, and GE[3:2] are set or cleared together.
This instruction is available in A32 and T32.
There is no 16-bit version of this instruction in T32.