You copied the Doc URL to your clipboard.

UXTB

Zero extend Byte.

Syntax

UXTB{cond} {Rd}, Rm {,rotation}

where:

cond

is an optional condition code.

Rd

is the destination register.

Rm

is the register holding the value to extend.

rotation

is one of:

ROR #8

Value from Rm is rotated right 8 bits.

ROR #16

Value from Rm is rotated right 16 bits.

ROR #24

Value from Rm is rotated right 24 bits.

If rotation is omitted, no rotation is performed.

Operation

UXTB extends an 8-bit value to a 32-bit value. It does this by:

  1. Rotating the value from Rm right by 0, 8, 16, or 24 bits.

  2. Extracting bits[7:0] from the value obtained.

  3. Zero extending to 32 bits.

Register restrictions

You cannot use PC for any operand.

You can use SP in A32 instructions but this is deprecated. You cannot use SP in T32 instructions.

Condition flags

This instruction does not change the flags.

16-bit instruction

The following form of this instruction is available in T32 code, and is a 16-bit instruction:

UXTB Rd, Rm

Rd and Rm must both be Lo registers.

Availability

The 32-bit instruction is available in A32 and T32.

For the Arm®v7‑M architecture, the 32-bit T32 instruction is only available in an Armv7E-M implementation.

The 16-bit instruction is available in T32.

Was this page helpful? Yes No