You copied the Doc URL to your clipboard.

FMAXV (vector)

Floating-point Maximum across Vector.

Syntax

FMAXV Vd, Vn.T ; Half-precision

FMAXV Vd, Vn.T ; Single-precision and double-precision

Where:

V

Is the destination width specifier:

Single-precision and double-precision
Must be S.
Half-precision
Must be H.
T

Is an arrangement specifier:

Half-precision
Can be one of 4H or 8H.
Single-precision and double-precision
Must be 4S.
d
Is the number of the SIMD and FP destination register.
Vn
Is the name of the SIMD and FP source register.

Architectures supported (vector)

Supported in the Arm®v8.2 architecture and later.

Usage

Floating-point Maximum across Vector. This instruction compares all the vector elements in the source SIMD and FP register, and writes the largest of the values as a scalar to the destination SIMD and FP register. All the values in this instruction are floating-point values.

This instruction can generate a floating-point exception. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR or a synchronous exception being generated. For more information, see Floating-point exception traps in the Arm® Architecture Reference Manual Arm®v8, for Arm®v8‑A architecture profile.

Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.

Was this page helpful? Yes No