You copied the Doc URL to your clipboard.

REVSH

Reverse the byte order in the bottom halfword, and sign extend to 32 bits.

Syntax

REVSH{cond} Rd, Rn

where:

cond

is an optional condition code.

Rd

is the destination register.

Rn

is the register holding the operand.

Usage

You can use this instruction to change endianness. REVSH converts either:

  • 16-bit signed big-endian data into 32-bit signed little-endian data.
  • 16-bit signed little-endian data into 32-bit signed big-endian data.

Register restrictions

You cannot use PC for any register.

You can use SP in the A32 instruction but this is deprecated. You cannot use SP in the T32 instruction.

Condition flags

This instruction does not change the flags.

16-bit instructions

The following form of this instruction is available in T32 code, and is a 16-bit instruction:

REVSH Rd, Rm

Rd and Rm must both be Lo registers.

Architectures

This instruction is available in A32 and T32.

Example

    REVSH   r0, r5       ; Reverse Signed Halfword
Was this page helpful? Yes No