Dual 16-bit Signed Multiply with Addition of products, and optional exchange of operand halves.
is an optional parameter. If X is present, the most and least significant halfwords of the second operand are exchanged before the multiplications occur.
is an optional condition code.
is the destination register.
are the registers holding the operands.
SMUAD multiplies the bottom halfword
with the bottom halfword of
and the top halfword of
the top halfword of
. It then
adds the products and stores the sum to
You cannot use PC for any operand.
You can use SP in A32 instructions but this is deprecated. You cannot use SP in T32 instructions.
SMUAD instruction sets the
Q flag if the addition overflows.
The 32-bit instruction is available in A32 and T32.
For the ARMv7-M architecture, the 32-bit T32 instruction is only available in an ARMv7E-M implementation.
There is no 16-bit version of this instruction in T32.
SMUAD r2, r3, r2