You copied the Doc URL to your clipboard.

SBFX

Signed Bitfield Extract.

This instruction is an alias of SBFM.

The equivalent instruction is SBFM Wd, Wn, #lsb, #(lsb+width-1).

Syntax

SBFX Wd, Wn, #lsb, #width ; 32-bit

SBFX Xd, Xn, #lsb, #width ; 64-bit

Where:

Wd
Is the 32-bit name of the general-purpose destination register.
Wn
Is the 32-bit name of the general-purpose source register.
lsb

Depends on the instruction variant:

32-bit general registers
Is the bit number of the lsb of the source bitfield, in the range 0 to 31.
64-bit general registers
Is the bit number of the lsb of the source bitfield, in the range 0 to 63.
width

Depends on the instruction variant:

32-bit general registers
Is the width of the bitfield, in the range 1 to 32-lsb.
64-bit general registers
Is the width of the bitfield, in the range 1 to 64-lsb.
Xd
Is the 64-bit name of the general-purpose destination register.
Xn
Is the 64-bit name of the general-purpose source register.

Usage

Signed Bitfield Extract extracts any number of adjacent bits at any position from a register, sign-extends them to the size of the register, and writes the result to the destination register.

Was this page helpful? Yes No