The Read-Modify-Write operation
The read-modify-write operation ensures that you modify only the specific bits in a system register that you want to change.
Individual bits in a system register control different system functionality. Modifying the wrong bits in a system register might cause your program to behave incorrectly.
VMRS r10,FPSCR ; copy FPSCR into the general-purpose r10 BIC r10,r10,#0x00370000 ; clear STRIDE bits[21:20] and LEN bits[18:16] ORR r10,r10,#0x00030000 ; set bits[17:16] (STRIDE =1 and LEN = 4) VMSR FPSCR,r10 ; copy r10 back into FPSCR
To read-modify-write a system register, the instruction sequence is:
- The first instruction copies the value from the target system register to a temporary general-purpose register.
- The next one or more instructions modify the required bits in the
general-purpose register. This can be one or both of:
BICto clear to 0 only the bits that must be cleared.
ORRto set to 1 only the bits that must be set.
- The final instruction writes the value from the general-purpose register to the target system register.