You copied the Doc URL to your clipboard.

Bare-metal linking model

The bare-metal model focuses on the conventional embedded market where the whole program, possibly including a Real-Time Operating System (RTOS), is linked in one pass. Very few assumptions can be made by the linker about the memory map of a bare metal system. Therefore, you must use the scatter-loading mechanism if you want more precise control.

By default, the linker attempts to resolve all the relocations statically. However, it is also possible to create a position-independent or relocatable image. Such an image can be executed from different addresses and have its relocations resolved at load or run-time. This can be achieved using a dynamic model.

With this type of model, you can:

  • Identify the regions that can be relocated or are position-independent using a scatter file or command-line options.

  • Identify the symbols that can be imported and exported using a steering file.

  • Identify the shared libraries that are required by the ELF file using a steering file.

You can use the following options with this model:

  • --edit=file_list

  • --scatter=file.

You can use the following options when scatter-loading is not used:

  • --reloc.

  • --ro_base=address.

  • --rosplit.

  • --rw_base=address.

  • --split.

  • --zi_base.

Was this page helpful? Yes No