You copied the Doc URL to your clipboard.

Revisions

This following table describes the technical changes between released issues of this book.

Table D-1 Issue DDI0524A

Change Location Affects
No changes, first release - -

Table D-2 Differences between issue DDI0524A and issue DDI0524B

Change Location Affects
Added section describing how to calibrate PVT sensor. Calibrating the PVT sensor All versions of board.
Removed OSCCLKs 3, 6, 7 and 8 and associated clock outputs.

Juno SoC and V2M‑Juno motherboard clocks

HDLCD interface

All versions of board.
Removed or modified some references to Juno Arm® Development Platform SoC Technical Reference Manual (Revision r0p0). Throughout the document. All versions of board.

Table D-3 Differences between issue DDI0524B and issue DDI0524C

Change Location Affects
Updated energy meter register names. APB energy register summary All versions of board.

Table D-4 Differences between issue DDI0524C and issue 100113_0000_03

Change Location Affects
Document number changed from Arm DDI0524 to 100113. Throughout document All versions of board.
Added LAN9118 information.

Overview of V2M-Juno motherboard hardware

IOFPGA

SMC 10/100 Ethernet interface

All versions of board.
Corrected Juno SoC diagram. Juno Arm® Development Platform SoC All versions of board.

Table D-5 Differences between issue 100113_0000_03 and issue 100113_0000_04

Change Location Affects
Corrected bit definition in register description. SYS_FLAG Registers All versions of board.

Table D-6 Differences between issue 100113_0000_04 and issue 100113_0000_05

Change Location Affects
Added statement about Expansion AXI over Thin Links providing a 256MB window.

Juno Arm® Development Platform SoC

V2M‑Juno motherboard
Added details to top‑level memory map diagram and note underneath memory map diagram.

Juno SoC top-level application and SMC interface memory maps

V2M‑Juno motherboard
Added details to DDR3L memory map diagram.

DDR3L memory map

V2M‑Juno motherboard
Updated list of typical applications in the SOFTWARE directory.

Contents of the SOFTWARE directory

V2M‑Juno motherboard
Corrected signal name in reset architecture diagram.

Reset architecture

V2M‑Juno motherboard

Table D-7 Differences between issue 100113_0000_05 and issue 100113_0000_06

Change Location Affects
Corrected Thin Links operating speeds.

Juno Arm® Development Platform SoC

Overview of Thin Links AXI master and slave interfaces

V2M‑Juno motherboard

Table D-8 Differences between issue 100113-0000-06 and issue 100113-0000-07

Change Location Affects
Updated safety messages.

Ensuring safety

V2M‑Juno motherboard

Removed reference to connecting an ATX power supply unit directly to the board.

Added warning that only the power supply unit, that Arm supplies, must be used to power the board

External power V2M‑Juno motherboard
Was this page helpful? Yes No