You copied the Doc URL to your clipboard.

Arm Cortex‑M1 DesignStart FPGA-Xilinx edition User Guide : Debug

Debug

The example design uses Serial Wire Debug (SWD). There is no dedicated Arm debug connector on the Arty Artix 7 (A7) board, therefore, SWD is only connected to the expansion connector. When the V2C-DAPLink adaptor board is fitted, the SWD ports are connected directly to this board and are accessible through the USB connector as part of the V2C-DAPLink interface.

To use JTAG debug, you must use a suitable debug probe, and route the JTAG connections to the expansion headers.

Was this page helpful? Yes No