You copied the Doc URL to your clipboard.

Design flow

The MMU-600 is delivered as synthesizable RTL. Before it can be used in a product, it must go through the following processes:

The implementer configures and synthesizes the RTL to produce a hard macrocell. This process might include integrating RAMs into the design.
The integrator connects the implemented design into a SoC. Integration includes connecting the design to a memory system and peripherals.
The system programmer develops the software to configure and initialize the MMU-600, and tests the required application software.

Each process is separate, and can include implementation and integration choices that affect the behavior and features of the MMU-600.

The operation of the final device depends on:

Build configuration
The implementer chooses the options that affect how the RTL source files are pre-processed. These options usually include or exclude logic that affects one or more of the following:
  • Area.
  • Maximum frequency.
  • Features of the resulting macrocell.
Configuration inputs
The integrator configures some features of the MMU-600 by tying inputs to specific values. These configurations affect the start-up behavior before any software configuration is made.
Software configuration
The programmer configures the MMU-600 by programming particular values into registers. This configuration affects the behavior of the MMU-600.
Was this page helpful? Yes No