You copied the Doc URL to your clipboard.

Arm CoreLink GIC-600 Generic Interrupt Controller Technical Reference Manual : Peripheral ID2 Register, GICP_PIDR2

Peripheral ID2 Register, GICP_PIDR2

This register returns byte[2] of the peripheral ID. The GICP_PIDR2 register is part of the set of performance monitoring peripheral identification registers.

The GICP_PIDR2 characteristics are:

Usage constraintsThere are no usage constraints.
ConfigurationsAvailable in all GIC-600 configurations.
AttributesSee GICP register summary.

The following figure shows the bit assignments.

Figure 4-57 GICP_PIDR2_bit assignments


The following table shows the bit assignments.

Table 4-73 GICP_PIDR2 bit assignments

Bits Name Function
[31:8] - Reserved, RAZ.
[7:4] ArchRev

Identifies the version of the GIC architecture with which the GIC-600 complies:

  • 0x3 = GICv3.
[3] JEDEC Indicates that a JEDEC-assigned JEP106 identity code is used.
[2:0] DES_1 Bits[6:4] of the JEP106 identity code. Bits[3:0] of the JEP106 identity code are assigned to GICP_PIDR1.
Was this page helpful? Yes No