You copied the Doc URL to your clipboard.

Arm Cortex‑A76 Core Technical Reference Manual : ICC_SRE_EL2, Interrupt Controller System Register Enable register, EL2

ICC_SRE_EL2, Interrupt Controller System Register Enable register, EL2

ICC_SRE_EL2 controls whether the system register interface or the memory-mapped interface to the GIC CPU interface is used for EL2.

Bit field descriptions

ICC_SRE_EL2 is a 32-bit register and is part of:

  • The GIC system registers functional group.
  • The Virtualization registers functional group.
  • The GIC control registers functional group.

Figure B4-6 ICC_SRE_EL2 bit assignments


RES0, [31:4]
Reserved, RES0.
Enable, [3]

Enables lower Exception level access to ICC_SRE_EL1. The value is:

0x1

Non-secure EL1 accesses to ICC_SRE_EL1 do not trap to EL2.

This bit is RAO/WI.

DIB, [2]

Disable IRQ bypass. The possible values are:

0x0

IRQ bypass enabled.

0x1

IRQ bypass disabled.

This bit is an alias of ICC_SRE_EL3.DIB

DFB, [1]

Disable FIQ bypass. The possible values are:

0x0

FIQ bypass enabled.

0x1

FIQ bypass disabled.

This bit is an alias of ICC_SRE_EL3.DFB

SRE, [0]

System Register Enable. The value is:

0x1

The System register interface for the current Security state is enabled.

This bit is RAO/WI. The core only supports a system register interface to the GIC CPU interface.

Bit fields and details that are not provided in this description are architecturally defined. See the Arm® Generic Interrupt Controller Architecture Specification.

Was this page helpful? Yes No