You copied the Doc URL to your clipboard.

Encoding for power modes

The following table shows the encodings for the supported modes for each core domain P-Channel.

Table A4-2 Core power modes COREPSTATE encoding

Power mode Short name PACTIVE bit number PSTATE value a Power mode description
Debug recovery DEBUG_RECOV - 0b001010

Logic is off (or in reset), RAM state is retained and not invalidated when transitioning to On mode.

On ON 8 0b001000

All powerup.

Core dynamic retention FULL_RET 5 0b000101

Logic and RAM state are inoperable but retained.

Off (emulated) OFF_EMU 1 0b000001

On with Warm reset asserted, debug state is retained and accessible.

Off OFF 0 (implicit)b 0b000000

All powerdown.

a PSTATE[5:4] are don't care.
b It is tied off to 0 and should be inferred when all other PACTIVE bits are LOW. For more information, see the AMBA® Low Power Interface Specification Arm® Q-Channel and P-Channel Interfaces.
Was this page helpful? Yes No