To install and use DS-5, your workstation must have a minimum specification of a dual core 2GHz processor (or equivalent) and 2GB of RAM.
To improve performance when debugging large images, using models with large simulated memory maps, or when using ARM® Streamline Performance Analyzer, 4GB of RAM, or more is recommended.
A full installation also requires approximately 3GB of hard disk space.
Host platform requirements
DS-5 is supported on the following host platforms and service packs.
- Windows 10
- Windows 7 Professional Service Pack 1
- Windows 7 Enterprise Service Pack 1
- Red Hat Enterprise Linux 6 Workstation
- Red Hat Enterprise Linux 7 Workstation
- Ubuntu Desktop Edition 12.04 LTS
- Ubuntu Desktop Edition 14.04 LTS
NoteDS-5 is supported on 64-bit host platforms only.
In addition, ARM Compiler toolchains are supported on the following host platforms:
- Windows 8.1 (64-bit only) (ARM Compiler 5 and 6 toolchains only)
- Windows Server 2012 (64-bit only) (ARM Compiler 5 and 6 toolchains only)
Debug system requirements
Linux application debug requires gdbserver on your target. The recommended version of gdbserver is 7.0 or later.
NoteDS-5 Debugger is unable to provide reliable multi-threaded debug support with gdbserver versions prior to 6.8.
Linux application rewind requires
undodb-server on your target. DS-5 Debugger copies
undodb-server to the target for you in the
Download and Debug connection type, but
for all other connection types, you must copy it yourself. The
undodb-server binary is located in the
directory within your installation.
DS-5 support for Linux application debug depends on infrastructure and features that are introduced in specific kernel versions:
- DS-5 Debugger supports debugging ARM Linux kernel versions 2.6.28 and later.
Application debug on Symmetric MultiProcessing (SMP) systems requires ARM Linux kernel version 2.6.36 or later.
Access to VFP and NEON registers require ARM Linux kernel version 2.6.30 or later and gdbserver version 7.0 or later.
- ARM Streamline Performance Analyzer supports ARM Linux kernel versions 3.4 and later.
Additional tools for Linux kernel and bare-metal hardware debugging
ARM Linux kernel and bare-metal debugging require the use of additional tools (not supplied with DS-5) to connect to your hardware target system.
DSTREAM, RVI, ULINKpro, ULINKpro D, and ULINK2 debug units enable connection to physical hardware targets.
NoteYou must use DSTREAM for ARMv8 development.
VSTREAM enables connection to RTL simulators and hardware emulators.
Managing firmware updates
- For DSTREAM and RVI use the Debug Hardware
Firmware Installer view to check the firmware and
update it if necessary. Updated firmware is available in the
- For VSTREAM, the firmware is delivered as part of the VSTREAM software. To update the firmware, you must install a newer version of VSTREAM.
- For ULINK2 target connection probe to work with DS-5 Debugger, it must
be upgraded with CMSIS-DAP compatible firmware. The UL2_Upgrade.exe program (Windows only) can upgrade your ULINK2
unit for you. The program and instructions are available in the
- For ULINKpro and ULINKpro D, DS-5 manages the firmware.