You copied the Doc URL to your clipboard.

Mali_G51 - trace

This section describes the trace sources.

INFO_AccessInReset

GPU Register %{READ:(WRITE|READ)} to address: %{ADDR} FAILED as GPU is being reset. Fields:

ADDR unsigned int
Address of the accessed register.
READ bool
Transaction type is read or write.

INFO_IrqGpuControl

IRQ signal received %{IRQ_ID}(%{IRQ_NAME}) state %{IRQ_STATE:(SET|CLEAR)}. Fields:

IRQ_ID unsigned int
The IRQ id.
IRQ_NAME string
The IRQ name
IRQ_STATE bool
The IRQ state

INFO_IrqJobControl

IRQ signal received %{IRQ_ID}(%{IRQ_NAME}) state %{IRQ_STATE:(SET|CLEAR)}. Fields:

IRQ_ID unsigned int
The IRQ id.
IRQ_NAME string
The IRQ name
IRQ_STATE bool
The IRQ state

INFO_IrqMmuControl

IRQ signal received %{IRQ_ID}(%{IRQ_NAME}) state %{IRQ_STATE:(SET|CLEAR)}. Fields:

IRQ_ID unsigned int
The IRQ id.
IRQ_NAME string
The IRQ name
IRQ_STATE bool
The IRQ state

INFO_ReadRegister

GPU Register Offset: %{REG_OFFSET} Value: %{VALUE} RegName: %{REG_NAME}. Fields:

REG_NAME string
The name of the register read.
REG_OFFSET unsigned int
The address of the register read.
VALUE unsigned int
Read Value from the register.

INFO_Reset

GPU Reset %{STATE:(START|END)}. Fields:

STATE bool
Reset state is start or end.

INFO_WriteRegister

GPU Register Offset: %{REG_OFFSET} Updated: From value %{VALUE} To value %{UPDATED_VALUE} RegName: %{REG_NAME}. Fields:

REG_NAME string
The name of the register updated.
REG_OFFSET unsigned int
The address of the register updated.
UPDATED_VALUE unsigned int
New Value in the register.
VALUE unsigned int
Old Value in the register.

WARN_AccessToUnimplementedRegister

GPU Register %{READ:(WRITE|READ)} to address: %{ADDR} FAILED as the register is unimplemented. Fields:

ADDR unsigned int
Address of the accessed register.
READ bool
Transaction type is read or write.

WARN_ReadToWriteOnlyRegister

GPU Register Read to address: %{ADDR} FAILED as the register is write-only RegName: %{REG_NAME}. Fields:

ADDR unsigned int
Address of the accessed register.
REG_NAME string
The name of the register updated.

WARN_WriteToReadOnlyRegister

GPU Register Write to address: %{ADDR} FAILED as the register is read-only RegName: %{REG_NAME}. Fields:

ADDR unsigned int
Address of the accessed register.
REG_NAME string
The name of the register updated.
Was this page helpful? Yes No