Trace Dump dialog box
Use the Trace Dump dialog box to generate an output file containing the encoded trace data from the buffer. You can also specify for metadata files to be created, which describe the trace sources that produced that data.
- Select Trace Capture Device
Select the trace capture device which should have its data dumped.
- Select Trace Source
Select the trace source which should have its data dumped. You can select multiple sources.
- Raw Dump for Devices
If selected, dump the data retrieved from RDDI, including any device-specific formatting.
If unselected, provides the target data captured in a format suitable for export. Typically, this is 16-byte CoreSight frames with full frame syncs removed.
- Dump Trace and Metadata
Dump both the trace data and the metadata.
- Dump Trace Only
Dump the trace data only.
- Dump Metadata Only
Dump the metadata only.
- Base Directory
Full path to the base directory to write the output to.
- Dump Directory
New directory to create within the Base Directory. The dump output is printed within this directory.
- Split Output Files
Maximum output file size before the output is split and written to multiple files.
- Split Files at 1MB.
- Split Files at 32MB (FAT limit).
- Split Files at 512MB.
- Split Files at 1GB (default).
- Split Files at 2GB (FAT16 limit).
- Split Files at 4GB (FAT32 limit).
Open the Show Contextual Help dialog.
Accept the current configure options and create the Trace Dump file.
Exit the Trace Dump dialog.
- Reset defaults
Reset all configuration options to their default values.
Figure 15-58 Trace Dump dialog box