Use the MMU/MPU view to perform address translations or for an overview of the translation tables and virtual memory map.
This view enables you to:
- Perform simple virtual to physical address translation.
- Perform simple physical to virtual address translation.
- Inspect and traverse MMU and MPU tables.
- See an overview of the virtual memory map.
- Freeze the view to prevent it from being updated by a running target.
NoteMMU awareness is only supported on Arm®v7-A and Armv8-A architectures. MPU awareness is only supported on Armv8-M architecture.
MMU/MPU Translation tab
For targets that support address translations, the Translation tab enables you to translate:
- Virtual address to physical address.
- Physical address to one or more virtual addresses.
Figure 15-28 MMU/MPU Translation tab view
To perform an address translation in the Translation tab:
- Enter a physical or virtual address in the address field. You can also enter an expression that evaluates to an address.
- Select Physical to Virtual or Virtual to Physical depending on the translation type.
- Click Translate to perform the address translation.
The Result shows the output address after the translation. The view also shows the details of the translation regime and parameters. You can customize these parameters using the MMU Settings dialog.
MMU/MPU Tables tab
The Tables tab displays the content of tables used by the MMU or MPU. For targets with multiple translation regimes, you can change the translation regime using the MMU Settings dialog.
Figure 15-29 MMU/MPU Tables tab view
For targets which support address translation, the Tables tab contains the following columns:
- Input Address
Specifies the input address to the translation table. This is usually the virtual address, but it can also be an intermediate physical address.
Specifies the type of entry in the translation table, for example Page Table, Section, Super Section, Small Page, or Large Page.
- Output Address
Specifies the output address from the translation table. This is usually the physical address, but it can also be an intermediate physical address.
Specifies the attributes for the memory region.
The Tables tab also provides additional information for each row of the translation table:
- Descriptor Address
Specifies the address of the selected translation table location.
- Descriptor Value
Specifies the content of the selected translation table location.
- Input Address Range
Specifies the range of input addresses that are mapped by the selected translation table location.
- Next-level Table Address
Specifies the Descriptor Address for the next level of lookup in the translation table.
For targets which do not support address translation, the Tables tab contains the following columns:
Specifies the base address of the region.
NoteFor Armv8-M targets which have an Implementation Defined Attribution Unit (IDAU) region, you must define the IDAU region of your target before the Tables tab can display region information. See setidau-region command documentation for details.
Specifies the last address of the region.
Specifies the region type.
Specifies the memory attributes of the IDAU region.
MMU/MPU Memory Map tab view
The Memory Map tab provides a view of the virtual memory layout by combining the MMU or MPU table entries that map contiguous regions of memory with a common memory type, for example, cacheability, shareability, and access attributes.
Figure 15-30 MMU/MPU Memory Map tab view