You copied the Doc URL to your clipboard.

Arm Cortex-M3 DesignStart FPGA-Xilinx edition User Guide : Programming


To program the example software design:


  1. In Vivado, open the hardware manager and auto-connect to the Arty Artix 7 (A7) board.
  2. Select Program Device. By default, Vivado selects the original bit file created m3_for_arty_a7_wrapper.bit.
  3. Navigate to V:/hardware/m3_for_arty_a7/m3_for_arty_a7.
  4. Select the m3_for_arty_prog.bit file generated in Generating bit and flash files.
  5. Select Program. The bit file with the latest software updates is now programmed on the board.
Was this page helpful? Yes No