You copied the Doc URL to your clipboard.

Arm Cortex-M3 DesignStart FPGA-Xilinx edition User Guide : Using the μVision debugger to download projects through the flash programming utility

Using the μVision debugger to download projects through the flash programming utility

To set up a μVision project to download projects through the flash programming utility, you must have the correct driver installed.

The file S25FL128S_V2C.FLM must first be copied to C:\Keil_v5\ARM\Flash, or wherever your Keil installation is. This file can be found in the V:\software\flash_downloader directory.

Procedure

  1. Load the project and then go to Options for Target <name of executable> (alt+F7)
  2. Select the Debug tab.
  3. Click on Settings and select the subsequent Flash Download tab

    Figure 5-7 Flash Download tab


  4. Click Add and select the driver file S25FL128S_V2C.

    Figure 5-8 Add Flash Programming Algorithm


  5. Click Add and check that the Start and Size text boxes are filled with 0x10000000 and 0x1000 respectively.
  6. Click OK.
  7. Select the Utilities tab from the Options for Target <name of executable> window and select Use Target Driver for Flash Programming and tick Use Debug Driver.

    Figure 5-9 Utilities tab


  8. Click OK.
  9. Click on the download icon to download flash.

    Figure 5-10 Download flash icon


Was this page helpful? Yes No