You copied the Doc URL to your clipboard.

Host Link issues

During the DSTREAM-PT system boot sequence, the LEDs identify the progress of the boot sequence. On the Parallel Trace probe, to indicate that the units are successfully linked, the Host Link LED briefly flashes blue, then illuminates green.

Solution

  1. Disconnect the AUX 60-way ribbon cable.
  2. Ensure the connector pins on the DSTREAM-ST unit and Parallel Trace probe are not damaged.
  3. Ensure the 60-way ribbon cable is not damaged.
  4. Reconnect the 60-way ribbon cable. Ensure both ends of the cable are securely connected.
  5. Reset the DSTREAM-PT system. Use the reset button on the rear of the DSTREAM-ST unit.
  6. If a reset does not fix the Host Link connection, restore the DSTREAM-PT system. For more information, see Restore a DSTREAM-PT system.

Solution

  1. Disconnect the AUX 60-way ribbon cable.
  2. Ensure the connector pins on the DSTREAM-ST unit and Parallel Trace probe are not damaged.
  3. Ensure the 60-way ribbon cable is not damaged.
  4. Reconnect the 60-way ribbon cable. Ensure both ends of the cable are securely connected.
  5. Reset the DSTREAM-PT system. Use the reset button on the rear of the DSTREAM-ST unit.
  6. If a reset does not fix the Host Link connection, restore the DSTREAM-PT system. For more information, see Restore a DSTREAM-PT system.
Was this page helpful? Yes No