You copied the Doc URL to your clipboard.

Target interface connectors

DSTREAM-ST has an Arm JTAG 20 connector, a CoreSight 20 connector, an auxiliary connector, and a user I/O connector.

The Parallel Trace probe provides an additional MIPI-60 connector.

To adapt debug connectors for other target connectors, you can use cables and adapter boards. Some of these cables and adapter boards are supplied with the debug unit. Others can be requested from Arm. For a list of provided adapters, see the Arm DSTREAM-PT Getting Started Guide.

If your target system uses a connector which is not currently supported, and you are considering a volume order of Arm debug units, contact Arm support with your requirements. Arm might be able to supply a compatible adapter on a fast-turn, prototype basis.

Note

All connector pinouts in this chapter are shown as they would appear on the target board.

Was this page helpful? Yes No