You copied the Doc URL to your clipboard.

Glossary

This glossary describes some of the terms used in technical documents from ARM Limited.

Advanced High-performance Bus (AHB)

A bus protocol with a fixed pipeline between address/control and data phases. It only supports a subset of the functionality provided by the AMBA AXI protocol. The full AMBA AHB protocol specification includes a number of features that are not commonly required for master and slave IP developments and ARM Limited recommends only a subset of the protocol is usually used. This subset is defined as the AMBA AHB-Lite protocol.

See Also Advanced Microcontroller Bus Architecture and AHB-Lite.

Advanced Microcontroller Bus Architecture (AMBA)

A family of protocol specifications that describe a strategy for the interconnect. AMBA is the ARM open standard for on-chip buses. It is an on-chip bus specification that details a strategy for the interconnection and management of functional blocks that make up a System-on-Chip (SoC). It aids in the development of embedded processors with one or more CPUs or signal processors and multiple peripherals. AMBA complements a reusable design methodology by defining a common backbone for SoC modules.

Advanced Peripheral Bus (APB)

A simpler bus protocol than AXI and AHB. It is designed for use with ancillary or general-purpose peripherals such as timers, interrupt controllers, UARTs, and I/O ports. Connection to the main system bus is through a system-to-peripheral bus bridge that helps to reduce system power consumption.

AHB

See Advanced High-performance Bus.

AMBA

See Advanced Microcontroller Bus Architecture.

Application Specific Integrated Circuit (ASIC)

An integrated circuit that has been designed to perform a specific application function. It can be custom-built or mass-produced.

Application Specific Standard Part/Product (ASSP)

An integrated circuit that has been designed to perform a specific application function. Usually consists of two or more separate circuit functions combined as a building block suitable for use in a range of products for one or more specific application markets.

ASIC

See Application Specific Integrated Circuit.

ASSP

See Application Specific Standard Part/Product.

ATPG

See Automatic Test Pattern Generation.

Automatic Test Pattern Generation (ATPG)

The process of automatically generating manufacturing test vectors for an ASIC design, using a specialized software tool.

Clock gating

Gating a clock signal for a macrocell with a control signal and using the modified clock that results to control the operating state of the macrocell.

Debugger

A debugging system that includes a program, used to detect, locate, and correct software faults, together with custom hardware that supports software debugging.

Design Simulation Model (DSM)

A functional simulation model of the device that is derived from the Register Transfer Level (RTL) but that does not reveal its internal structure. The DSM does not model any features added during synthesis such as internal scan chains. The DSM provides higher speed for functional simulation than that of the Sign-Off Model (SOM).

DSM

See Design Simulation Model.

Embedded Trace Macrocell (ETM)

A hardware macrocell that, when connected to a processor core, outputs instruction and data trace information on a trace port. The ETM provides processor driven trace through a trace port compliant to the ATB protocol.

ETM

See Embedded Trace Macrocell.

Half-rate clocking (ETM)

Dividing the trace clock by two so that the TPA can sample trace data signals on both the rising and falling edges of the trace clock. The primary purpose of half-rate clocking is to reduce the signal transition rate on the trace clock of an ASIC for very high-speed systems.

Joint Test Action Group (JTAG)

The name of the organization that developed standard IEEE 1149.1. This standard defines a boundary-scan architecture used for in-circuit testing of integrated circuit devices. It is commonly known by the initials JTAG.

JTAG

See Joint Test Action Group.

Macrocell

A complex logic block with a defined interface and behavior. A typical VLSI system comprises several macrocells (such as a processor, an ETM, and a memory block) plus application-specific logic.

Modified Virtual Address (MVA)

A Virtual Address produced by the ARM processor can be changed by the current Process ID to provide a Modified Virtual Address (MVA) for the MMUs and caches.

See Also Fast Context Switch Extension.

MVA

See Modified Virtual Address.

SCREG

The currently selected scan chain number in an ARM TAP controller.

SPICE

Simulation Program with Integrated Circuit Emphasis. An accurate transistor-level electronic circuit simulation tool that can predict how an equivalent real circuit behaves for given circuit conditions.

TAP

See Test access port.

Test Access Port (TAP)

The collection of four mandatory and one optional terminals that form the input/output and control interface to a JTAG boundary-scan architecture. The mandatory terminals are TDI, TDO, TMS, and TCK. The optional terminal is TRST. This signal is mandatory in ARM cores because it is used to reset the debug logic.

Trace driver

A Remote Debug Interface target that controls a piece of trace hardware. That is, the trigger macrocell, trace macrocell, and trace capture tool.

Trace hardware

A term for a device that contains an Embedded Trace Macrocell.

Trace port

A port on a device, such as a processor or ASIC, used to output trace information.

Trace Port Analyzer (TPA)

A hardware device that captures trace information output on a trace port. This can be a low-cost product designed specifically for trace acquisition, or a logic analyzer.

Was this page helpful? Yes No