You copied the Doc URL to your clipboard.

Appendix C. Revisions

This appendix describes the technical changes between released issues of this book.

Table C.1. Differences between issue F and issue G
ChangeLocation
Added description of product documentation and architectureProduct documentation and architecture
Updated reset value of Main ID Register
Updated bit assignments and description of Auxiliary Control Registerc1, Auxiliary Control Register
Show effect of improved cache maintenanceTable 3.73
Changed description of values for predefined events 0x45 and 0x46Table 3.97
Expanded description of DT field in PLE Control RegisterTable 3.126
Updated description of L1 memory system
Added section on instruction cache maintenanceInstruction cache maintenance
Reorganized tables for AXI ID assignmentsAXI identifiers
Updated descriptions of AXI address channel for data transactionsTable 9.7
Added table showing number of transfers on AXI write channel for an evictionEvictions
Clarified timing diagram of STANDBYWFI deassertionFigure 10.9
Updated field values for Debug ID RegisterCP14 c0, Debug ID Register
Updated field values for Peripheral ID Register 2
Updated ID Register bit assignmentsFigure 14.2
Added tables to show the effect of CP15 cache maintenanceCoprocessor instructions
Added footnote to clarify back-to-back execution of certain multiply and multiply-accumulate instructionsTable 16.19
Added Note to clarify operation of Advanced SIMD floating-point instructionsAdvanced SIMD floating-point instructions
Expanded description of VFP instruction executionVFP instruction execution in the NFP pipeline

Table C.2. Differences between issue G and issue H
ChangeLocation
Amended function description for invalidate instruction cache lineTable 3.73

Table C.3. Differences between issue H and issue I
ChangeLocationAffects
Updated Product revisions informationProduct revisionsAll revisions
Updated Main ID Register to reflect revision changer3p0
Modified description for bits [7:4] and [3:0] in the Debug ID RegisterTable 12.11All revisions
Modified description for the Revision field in the Peripheral Identification RegistersTable 12.45All revisions
Updated description and reset value for bits [7:4] in the Peripheral ID Register 3r3p0
Updated value for bits [3:0] of the FPSID RegisterTable 13.7r3p0
Changed the name for trigger input 0 from DBGTRIGGER to Debug entry.r3p0
Added text to clarify description for trigger input 0Table 15.1All revisions
Added a note to clarify description for trigger outputs 0 and 8Trigger inputs and outputsAll revisions
Updated the value and description for bits [4:0] of the CTI Device ID RegisterAll revisions
Added text to clarify description for bit [0] of the CTI Interrupt Acknowledge RegisterTable 15.5All revisions
Updated description for the load data miss replay eventTable 16.16All revisions
Clarified description of dual issue for Advanced SIMD instructionsDual issue for Advanced SIMD instructionsAll revisions

Was this page helpful? Yes No