Conventions that this book can use are described in:
The typographical conventions are:
Highlights important notes, introduces special terminology, denotes internal cross-references, and citations.
Highlights interface elements, such as menu names. Denotes signal names. Also used for terms in descriptive lists, where appropriate.
Denotes text that you can enter at the keyboard, such as commands, file and program names, and source code.
Denotes a permitted abbreviation for a command or option. You can enter the underlined text instead of the full command or option name.
Denotes arguments to monospace text where the argument is to be replaced by a specific value.
- monospace bold
Denotes language keywords when used outside example code.
- < and >
Enclose replaceable terms for assembler syntax where they appear in code or code fragments. For example:
MRC p15, 0 <Rd>, <CRn>, <CRm>, <Opcode_2>
The figure named Figure 1 explains the components used in timing diagrams. Variations, when they occur, have clear labels. You must not assume any timing information that is not explicit in the diagrams.
Shaded bus and signal areas are undefined, so the bus or signal can assume any value within the shaded area at that time. The actual level is unimportant and does not affect normal operation.
The signal conventions are:
- Signal level
The level of an asserted signal depends on whether the signal is active-HIGH or active-LOW. Asserted means:
HIGH for active-HIGH signals
LOW for active-LOW signals.
- Prefix a
Denotes global Advanced eXtensible Interface (AXI) signals.
- Prefix ar
Denotes AXI read address channel signals.
- Prefix aw
Denotes AXI write address channel signals.
- Prefix b
Denotes AXI write response channel signals.
- Prefix p
Denotes Advanced Peripheral Bus (APB) signals.
- Prefix n
Denotes an active-LOW signal.
- Prefix r
Denotes AXI read data channel signals.
- Prefix w
Denotes AXI write data channel signals.