You copied the Doc URL to your clipboard.

3.4.21. Sequencer Reset Control Register

The TRCSEQRSTEVR characteristics are:

Purpose

Resets the sequencer to state 0.

Usage constraints

Can only be written when the ETM-R7 is disabled.

Configurations

Available in all configurations.

Attributes

See the register summary in Table 3.1 and Table 3.4.

Figure 3.22 shows the TRCSEQRSTEVR bit assignments.

Figure 3.22. TRCSEQRSTEVR bit assignments

Figure 3.22. TRCSEQRSTEVR bit assignments

Table 3.32 shows the TRCSEQRSTEVR bit assignments.

Table 3.32. TRCSEQRSTEVR bit assignments
BitsNameFunction
[31:8]-RAZ/WI
[7]RESETTYPE

Selects the resource type to move back to state 0:

0

Single selected resource.

1

Boolean combined resource pair.

[6:4]-RAZ/WI
[3:0]RESETSEL

Selects the resource number, based on the value of RESETTYPE:

When RESETTYPE is 0, selects a single selected resource from 0-15 defined by bits[3:0].

When RESETTYPE is 1, selects a Boolean combined resource pair from 0-7 defined by bits[2:0].


Was this page helpful? Yes No