You copied the Doc URL to your clipboard.

3.4.17. ViewData Main Control Register

The TRCVDCTLR characteristics are:

Purpose

Controls data trace filtering.

Usage constraints

Can only be written when the ETM-R7 is disabled.

Configurations

Available in all configurations.

Attributes

See the register summary in Table 3.1 and Table 3.3.

Figure 3.18 shows the TRCVDCTLR bit assignments.

Figure 3.18. TRCVDCTLR bit assignments

Figure 3.18. TRCVDCTLR bit assignments

Table 3.28 shows the TRCVDCTLR bit assignments.

Table 3.28. TRCVDCTLR bit assignments
BitsNameFunction
[31:11]-RAZ/WI
[10]PCREL

Controls tracing of data for transfers that are relative to the Program Counter (PC):

0

Tracing of PC-relative transfers is unaffected.

1

Do not trace either the address or value portions of PC-relative transfers.

[9:8]SPREL

Controls tracing of data for transfers that are relative to the Stack Pointer (SP):

b00

Tracing of SP-relative transfers is unaffected.

b01

Reserved.

b10

Do not trace the address portion of SP-relative transfers. A P1 data address element is generated if data value tracing is enabled.

b11

Do not trace either the address or value portions of SP-relative transfers.

[7]TYPE

Selects the resource type:

0

Single selected resource.

1

Boolean combined resource pair.

[6:4]-RAZ/WI
[3:0]SEL

Selects the resource number, based on the value of TYPE:

When TYPE is 0, selects a single selected resource from 0-15 defined by bits[3:0].

When TYPE is 1, selects a Boolean combined resource pair from 0-7 defined by bits[2:0].


Was this page helpful? Yes No