You copied the Doc URL to your clipboard.

3.3.45. Peripheral ID2 Register

The PERIPHID2 Register characteristics are:

Purpose

Part of the set of Peripheral Identification registers. Contains part of the designer identity and the product revision.

Configurations

Present in all configurations.

Figure 3.45 shows the PERIPHID2 Register bit assignments.

Figure 3.45. PERIPHID2 Register bit assignments

Figure 3.45. PERIPHID2 Register bit assignments

Table 3.46 shows the PERIPHID2 Register bit assignments.

Table 3.46. PERIPHID2 Register bit assignments
BitsNameFunction
[31:8]Reserved

Reserved.

[7:4]Revision

The Revision field is an incremental value starting at 0x0 for the first design of this component. This only increases by one for both major and minor revisions and is used as a look-up to establish the exact major or minor revision.

0x0

This device is at r0p0.

[3]JEDEC

Always set. Indicates that a JEDEC assigned value is used.

0x1

The designer ID is specified by JEDEC.

[2:0]JEP106_bits6to4

Bits [6:4] of the JEDEC-identity code, indicating the designer of the component and the continuation code.

0x3

Upper three bits of the JEP106 Identity Code.


Was this page helpful? Yes No