You copied the Doc URL to your clipboard.

13.8.58. Software Lock Access Register

The TRCLAR characteristics are:


Controls access to registers using the memory-mapped interface, when PADDRDBG31 is LOW.

When the software lock is set, write accesses using the memory-mapped interface to all ETM trace unit registers are ignored, except for write accesses to the TRCLAR.

When the software lock is set, read accesses of TRCPDSR do not change the TRCPDSR.STICKYPD bit. Read accesses of all other registers are not affected.

Usage constraints

Accessible only from the memory-mapped interface.


Available in all configurations.


See the register summary in Table 13.3.

Figure 13.59 shows the TRCLAR bit assignments.

Figure 13.59. TRCLAR bit assignments

Figure 13.59. TRCLAR bit assignments

Table 13.61 shows the TRCLAR bit assignments.

Table 13.61. TRCLAR bit assignments

Software lock key value:


Clear the software lock.

All other write values set the software lock.

The TRCLAR can be accessed through the internal memory-mapped interface and the external debug interface, offset 0xFB0.