The TTBR0_EL1 characteristics are:
Holds the base address of translation table 0, and information about the memory it occupies. This is one of the translation tables for the stage 1 translation of memory accesses from modes other than Hyp mode.
- Usage constraints
This register is accessible as follows:
(SCR.NS = 1)
(SCR.NS = 0)
- RW RW RW RW RW
Any of the fields in this register are permitted to be cached in a TLB.
TTBR0_EL1 is architecturally mapped to AArch32 register TTBR0. See Translation Table Base Register 0
TTBR0_EL1 is 64-bit register.
Figure 4.40 shows the TTBR0_EL1 bit assignments.
Table 4.79 shows the TTBR0_EL1 bit assignments.
An ASID for the translation table base address. The TCR_EL1.A1 field selects either TTBR0_EL1.ASID or TTBR1_EL1.ASID.
Translation table base address, bits[47:x]. Bits [x-1:0] are res0.
x is based on the value of TCR_EL1.T0SZ, the stage of translation, and the memory translation granule size.
For instructions on how to calculate it, see the ARM® Architecture Reference Manual ARMv8, for ARMv8-A architecture profile
The value of x determines the required alignment of the translation table, that must be aligned to 2x bytes.
If bits [x-1:0] are not all zero, this is a misaligned Translation Table Base Address. Its effects are constrained unpredictable, where bits [x-1:0] are treated as if all the bits are zero. The value read back from those bits is the value written.
To access the TTBR0_EL1:
MRS <Xt>, TTBR0_EL1 ; Read TTBR0_EL1 into Xt MSR TTBR0_EL1, <Xt> ; Write Xt to TTBR0_EL1