The TTBR0_EL3 characteristics are:
Holds the base address of the translation table for the stage 1 translation of memory accesses from EL3.
- Usage constraints
This register is accessible as follows:
(SCR.NS = 1)
(SCR.NS = 0)
- - - - RW RW
TTBR0_EL3 is mapped to AArch32 register TTBR0 (S). See Translation Table Base Register 0.
TTBR0_EL3 is a 64-bit register.
Figure 4.48 shows the TTBR0_EL3 bit assignments.
Table 4.87 shows the TTBR0_EL3 bit assignments.
Translation table base address, bits[47:x]. Bits [x-1:0] are res0.
x is based on the value of TCR_EL1.T0SZ, the stage of translation, and the memory translation granule size.
For instructions on how to calculate it, see the ARM® Architecture Reference Manual ARMv8, for ARMv8-A architecture profile.
The value of x determines the required alignment of the translation table, that must be aligned to 2x bytes.
If bits [x-1:0] are not all zero, this is a misaligned Translation Table Base Address. Its effects are constrained unpredictable, where bits [x-1:0] are treated as if all the bits are zero. The value read back from those bits is the value written.
To access the TTBR0_EL3:
MRS <Xt>, TTBR0_EL3 ; Read TTBR0_EL3 into Xt MSR TTBR0_EL3, <Xt> ; Write Xt to TTBR0_EL3