You copied the Doc URL to your clipboard.

12.2.5. External register access permissions

External access permission to the PMU registers is subject to the conditions at the time of the access. Table 12.1 describes the processor response to accesses through the external debug and memory-mapped interfaces.

Table 12.1. External register conditions
NameConditionDescription
OffEDPRSR.PU is 0

Processor power domain is completely off, or in a low-power state where the processor power domain registers cannot be accessed.

DLKEDPRSR.DLK is 1OS Double Lock is locked.
OSLKOSLSR_EL1.OSLK is 1OS Lock is locked.
EPMADAllowExternalPMUAccess() == FALSEExternal performance monitors access is disabled. When an error is returned because of an EPMAD condition code, and this is the highest priority error condition, EDPRSR.SPMAD is set to 1. Otherwise SPMAD is unchanged.
SLKMemory-mapped interface onlySoftware lock is locked. For the external debug interface, ignore this column.
Default-None of the conditions apply, normal access.

Table 12.2 shows an example of external register condition codes for access to a performance monitor register. To determine the access permission for the register, scan the columns from left to right. Stop at the first column whose condition is true, the entry gives the register access permission and scanning stops.

Table 12.2. External register condition code example
OffDLKOSLKEPMADSLKDefault
----RO/WIRO

Was this page helpful? Yes No