The TRCITATBIDR characteristics are:
Sets the state of output pins shown in Table 13.52.
- Usage constraints
Available when bit of TRCITCTRL is set to 1.
The value of the register sets the signals on the output pins when the register is written.
Available in all configurations.
See the register summary in Table 13.3.
Figure 13.51 shows the TRCITATBIDR bit assignments.
Table 13.52 shows the TRCITATBIDR bit assignments.
|[31:7]||-||Reserved. Read undefined.|
|[6:0]||ID||Drives the ATIDMn[6:0] output pins[a].|
[a] When a bit is set to 0, the corresponding output pin is LOW.
When a bit is set to 1, the corresponding output pin is HIGH.
The TRCITATBIDR bit values correspond to the physical state of the output pins.
The TRCITATBIDR can be accessed through the internal memory-mapped
interface and the external debug interface, offset