You copied the Doc URL to your clipboard.

Auxiliary Control Register, EL2

The ACTLR_EL2 characteristics are:

Purpose

Controls write access to implementation defined registers in Non-secure EL1 modes, such as CPUACTLR, CPUECTLR, L2CTLR, L2ECTLR and L2ACTLR.

Usage constraints

This register is accessible as follows:

EL0

EL1

(NS)

EL1

(S)

EL2

EL3

(SCR.NS = 1)

EL3

(SCR.NS = 0)

- - - RW RW RW
Configurations

The ACTLR_EL2 is architecturally mapped to the AArch32 HACTLR register. See Hyp Auxiliary Control Register.

Attributes

ACTLR_EL2 is a 32-bit register.

Figure 4.29 shows the ACTLR_EL2 bit assignments.

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Table 4.73 shows the ACTLR_EL2 bit assignments.

Table 4.73. ACTLR_EL2 bit assignments
Bits Name Function
[31:7] -

Reserved, res0.

[6] L2ACTLR_EL1 access control

L2ACTLR_EL1 write access control. The possible values are:

0

The register is not write accessible from Non-secure EL1.This is the reset value.

1

The register is write accessible from Non-secure EL1.

Write access from Non-secure EL1 also requires ACTLR_EL3[6] to be set.

[5] L2ECTLR_EL1 access control

L2ECTLR_EL1 write access control. The possible values are:

0

The register is not write accessible from Non-secure EL1.This is the reset value.

1

The register is write accessible from Non-secure EL1.

Write access from Non-secure EL1 also requires ACTLR_EL3[5] to be set.

[4] L2CTLR_EL1 access control

L2CTLR_EL1 write access control. The possible values are:

0

The register is not write accessible from Non-secure EL1.This is the reset value.

1

The register is write accessible from Non-secure EL1.

Write access from Non-secure EL1 also requires ACTLR_EL3[4] to be set.

[3:2] -

Reserved, res0.

[1] CPUECTLR_EL1 access control

CPUECTLR_EL1 write access control. The possible values are:

0

The register is not write accessible from Non-secure EL1.This is the reset value.

1

The register is write accessible from Non-secure EL1.

Write access from Non-secure EL1 also requires ACTLR_EL3[1] to be set.

[0] CPUACTLR_EL1 access control

CPUACTLR_EL1 write access control. The possible values are:

0

The register is not write accessible from Non-secure EL1.This is the reset value.

1

The register is write accessible from Non-secure EL1.

Write access from Non-secure EL1 also requires ACTLR_EL3[0] to be set.


To access the ACTLR_EL2:

	
MRS <Xt>, ACTLR_EL2 ; Read ACTLR_EL2 into Xt
MSR ACTLR_EL2, <Xt> ; Write Xt to ACTLR_EL2
Was this page helpful? Yes No