You copied the Doc URL to your clipboard.

13.8.65. Component Identification Registers

There are four read-only Component Identification Registers, Component ID0 to Component ID3. Table 13.73 shows these registers.

Table 13.73. Summary of the Component Identification Registers
RegisterValueOffset
Component ID00x0D0xFF0
Component ID10x900xFF4
Component ID20x050xFF8
Component ID30xB10xFFC

The Component Identification Registers identify ETM trace unit as a CoreSight component.

The Component ID registers are:

Component Identification Register 0

The TRCCIDR0 characteristics are:

Purpose

Provides information to identify a trace component.

Usage constraints
  • Only bits[7:0] are valid.

  • Accessible only from the external debugger interface.

Configurations

Available in all implementations.

Attributes

See the register summary in Table 13.3.

Figure 13.70 shows the TRCCIDR0 bit assignments.

Figure 13.70. TRCCIDR0 bit assignments

Figure 13.70. TRCCIDR0 bit assignments

Table 13.74 shows the TRCCIDR0 bit assignments.

Table 13.74. TRCCIDR0 bit assignments
BitsNameFunction
[31:8]-

Reserved, res0.

[7:0]PRMBL_0
0x0D

Preamble byte 0.


The TRCCIDR0 can be accessed through the external debug interface, offset 0xFF0.

Component Identification Register 1

The TRCCIDR1 characteristics are:

Purpose

Provides information to identify a trace component.

Usage constraints
  • Only bits[7:0] are valid.

  • Accessible only from the external debugger interface.

Configurations

Available in all implementations.

Attributes

See the register summary in Table 13.3.

Figure 13.71 shows the TRCCIDR1 bit assignments.

Figure 13.71. TRCCIDR1 bit assignments

Figure 13.71. TRCCIDR1 bit assignments

Table 13.75 shows the TRCCIDR1 bit assignments.

Table 13.75. TRCCIDR1 bit assignments
BitsNameFunction
[31:8]-

Reserved, res0

[7:4]CLASS
0x9

Debug component

[3:0]PRMBL_1
0x0

Preamble byte 1


The TRCCIDR1 can be accessed through the external debug interface, offset 0xFF4.

Component Identification Register 2

The TRCCIDR2 characteristics are:

Purpose

Provides information to identify a CTI component.

Usage constraints
  • Only bits[7:0] are valid.

  • Accessible only from the external debugger interface.

Configurations

Available in all implementations.

Attributes

See the register summary in Table 13.3.

Figure 13.72 shows the TRCCIDR2 bit assignments.

Figure 13.72. TRCCIDR2 bit assignments

Figure 13.72. TRCCIDR2 bit assignments

Table 13.76 shows the TRCCIDR2 bit assignments.

Table 13.76. TRCCIDR2 bit assignments
BitsNameFunction
[31:8]-

Reserved, res0.

[7:0]PRMBL_2
0x05

Preamble byte 2.


The TRCCIDR2 can be accessed through the external debug interface, offset 0xFF8.

Component Identification Register 3

The TRCCIDR3 characteristics are:

Purpose

Provides information to identify a trace component.

Usage constraints
  • Only bits[7:0] are valid.

  • Accessible only from the external debugger interface.

Configurations

Available in all implementations.

Attributes

See the register summary in Table 13.3.

Figure 13.73 shows the TRCCIDR3 bit assignments.

Figure 13.73. TRCCIDR3 bit assignments

Figure 13.73. TRCCIDR3 bit assignments

Table 13.77 shows the TRCCIDR3 bit assignments.

Table 13.77. TRCCIDR3 bit assignments
BitsNameFunction
[31:8]-

Reserved, res0.

[7:0]PRMBL_3
0xB1

Preamble byte 3.


The TRCCIDR3 can be accessed through the external debug interface, offset 0xFFC.

Was this page helpful? Yes No