You copied the Doc URL to your clipboard.

13.8.49. Integration ATB Identification Register

The TRCITATBIDR characteristics are:

Purpose

Sets the state of output pins shown in Table 13.52.

Usage constraints
  • Available when bit[0] of TRCITCTRL is set to 1.

  • The value of the register sets the signals on the output pins when the register is written.

Configurations

Available in all configurations.

Attributes

See the register summary in Table 13.3.

Figure 13.51 shows the TRCITATBIDR bit assignments.

Figure 13.51. TRCITATBIDR bit assignments

Figure 13.51. TRCITATBIDR bit assignments

Table 13.52 shows the TRCITATBIDR bit assignments.

Table 13.52. TRCITATBIDR bit assignments
BitsNameFunction
[31:7]-Reserved. Read undefined.
[6:0]IDDrives the ATIDMn[6:0] output pins[a].

[a] When a bit is set to 0, the corresponding output pin is LOW.

When a bit is set to 1, the corresponding output pin is HIGH.

The TRCITATBIDR bit values correspond to the physical state of the output pins.


The TRCITATBIDR can be accessed through the external debug interface, offset 0xEE4.

Was this page helpful? Yes No