You copied the Doc URL to your clipboard.

13.8.52. Integration Instruction ATB Out Register

The TRCITIATBOUTR characteristics are:

Purpose

Sets the state of the output pins shown in Table 13.55.

Usage constraints
  • Available when bit[0] of TRCITCTRL is set to 1.

  • The value of the register sets the signals on the output pins when the register is written.

Configurations

Available in all configurations.

Attributes

See the register summaries in Table 13.3.

Figure 13.54 shows the TRCITIATBOUTR bit assignments.

Figure 13.54. TRCITIATBOUTR bit assignments

Figure 13.54. TRCITIATBOUTR bit assignments

Table 13.55 shows the TRCITIATBOUTR bit assignments.

Table 13.55. TRCITIATBOUTR bit assignments
BitsNameFunction
[31:10]-Reserved. Read undefined.
[9:8]BYTESDrives the ATBYTESMn[1:0] output pins[a].
[7:2]-Reserved. Read undefined.
[1]AFREADYDrives the AFREADYMn output pin[a].
[0]ATVALIDDrives the ATVALIDMn output pin[a].

[a] When a bit is set to 0, the corresponding output pin is LOW.

When a bit is set to 1, the corresponding output pin is HIGH.

The TRCITIATBOUTR bit values always correspond to the physical state of the output pins.


The TRCITIATBOUTR can be accessed through the external debug interface, offset 0xEFC.

Was this page helpful? Yes No