You copied the Doc URL to your clipboard.

13.8.43. Power Down Status Register

The TRCPDSR characteristics are:

Purpose

Indicates the power down status of the ETM trace unit.

Usage constraints

There are no usage constraints.

Configurations

Available in all configurations.

Attributes

See the register summary in Table 13.3.

Figure 13.45 shows the TRCPDSR bit assignments.

Figure 13.45. TRCPDSR bit assignments

Figure 13.45. TRCPDSR bit assignments

Table 13.46 shows the TRCPDSR bit assignments.

Table 13.46. TRCPDSR bit assignments
BitsNameFunction
[31:6]-Reserved, res0.
[5]OSLK

OS lock status.

0

The OS Lock is unlocked.

1

The OS Lock is locked.

[4:2]-Reserved, res0.
[1]STICKYPD

Sticky power down state.

0

Trace register power has not been removed since the TRCPDSR was last read.

1

Trace register power has been removed since the TRCPDSR was last read.

This bit is set to 1 when power to the ETM trace unit registers is removed, to indicate that programming state has been lost. It is cleared after a read of the TRCPDSR.

[0]POWER

Indicates the ETM trace unit is powered:

0

ETM trace unit is not powered. The trace registers are not accessible and they all return an error response.

1

ETM trace unit is powered. All registers are accessible.

If a system implementation allows the ETM trace unit to be powered off independently of the debug power domain, the system must handle accesses to the ETM trace unit appropriately.


The TRCPDSR can be accessed through the external debug interface, offset 0x314.

Was this page helpful? Yes No