The SMMU_ITCTRL register characteristics are:
This register enables the component to switch from functional mode to integration mode. You can directly control the inputs and outputs in integration mode.
A device might not operate with the original behavior in integration mode.
After performing integration, you must reset the system to ensure the correct behavior of system components that are affected by the integration.
Writing to this register other than when in the disabled state results in Unpredictable behavior.
Available in all MMU-500 configurations.
Figure 3.7 shows the bit assignments.
Table 3.19 shows the bit assignments.
Specifies the access information. The functionality of this bit field is determined by the value of the SMMU_ITCTRL.MODULE bit.
If the SMMU_ITCTRL.MODULE bit
is set to
the SMMU_ITCTRL.MODULE bit is set to
The TBU or TCU RAM. This bit can have one of the following values:
RAM data WNR. This bit can have one of the following values:
RAM mode. This bit can have one of the following values:
Integration Mode. Enables the component to switch between functional mode and integration mode. This bit can have one of the following values: