You copied the Doc URL to your clipboard.

1.3. Features

The MMU-500 provides the following features:

  • Address virtualization to other masters in an ARM processor based system and other bus masters in the system.

  • Support for the following translations:

    • Stage 1.

    • Stage 2.

    • Stage 1 followed by stage 2.

  • Programmable Quality of Service (QoS).

  • Distributed translation support for up to 32 TBUs.

  • Translation support for 32-bit to 49-bit virtual address ranges and 48-bit physical address ranges.

  • Multiple transaction contexts to apply to address translations for specific streams of transactions.

    • Supports up to 128 configurable contexts and programmable page size. The MMU-500 maps each context by using an input stream ID from the master device that requires address translation.

  • Translation support for the following:

    • Stage 1 ARMv7 VMSA.

    • Stage 1 and Stage 2 ARMv8 AArch32.

    • Stage 1 and Stage 2 ARMv8 AArch64 with 4KB and 64KB granules.

    • Stage 1 followed by stage 2 translations.

  • No page size restrictions. All page sizes are supported apart from the 16KB page granule defined by ARMv8 architecture.

  • Arbitration of PTW requests from different TBUs by using the programmed QoS value.

  • Page table walk cache for storing intermediate page table walk data.

  • Page table entry cache in the TLB.

  • Support for TLB Hit-Under-Miss (HUM).

  • Configurable PTW depth using parallel PTWs.

  • TLB invalidation through the AMBA 4 DVM signaling or register programming.

  • Translation and protection check support including TrustZone® extension support.

  • Fault handling, logging, and signaling that includes demand paging and support for the stall model.

  • One AMBA slave interface that supports ACE-Lite per TBU for connecting the bus master device that requires address translations. See AXI3 and AXI4 support.

  • One AMBA master interface for master device transactions or PTWs that support ACE-Lite and DVM. See AXI3 and AXI4 support.

  • An AXI4 interface for programming.

  • Page table entry cache in the TLB at two levels, namely:

    • Macro TLB.

    • Micro TLB.

  • The TLB at two levels and the walk cache RAMs support single bit error detection and invalidation on error detection. The context disambiguation Multi-FIFO (MFIFO) RAM supports single bit error detection and correction.

  • Debug and performance-monitoring events.

  • The TCU core can run at half the clock speed of the TCU external interfaces.

  • A prefetch buffer to prefetch the next 4K or 64K leaf page entry to reduce latency.

  • An IPA2PA cache to speed up stage 1 followed by stage 2 translations.

  • Support for 256 outstanding transactions for each TBU master interface.

  • Support for priority elevation as part of the QoS scheme.

For more information, see the following documents:

  • ARM® AMBA® AXI and ACE Protocol Specification AXI3, AXI4, and AXI4-Lite ACE and ACE-Lite

  • ARM® Architecture Reference Manual, ARMv8, for ARMv8-A architecture profile.

  • ARM® Architecture Reference Manual ARMv7-A and ARMv7-R edition.

Was this page helpful? Yes No